SSC Model
Features
- RO Elements: 4″ x 40″ Extra Low Energy Thin Film
- Pressure Vessels: 304 Stainless Steel (SS)
- Pump: Centrifugal 304 SS Shell, 316 SS Shaft
- Frame: 409 SS
- Control: Programmable with LCD Readout
- Flow Meters: Product and Waste
- RO Pressure Gauges
- Low Pressure Cutoff Switch
- Pre Filter: 5 Micron Sediment
- Inlet Filter Gauges (pre and post filter)
- Inlet Feed Electric Solenoid Valve
- Inlet Manual Shutoff Valve
- Product Reverse Flow Check Valve
- Waste Recycle Valve
Options
- Total Dissolved Solids (TDS) Meter
- Product Dump Valves (option requires TDS meter)
- Remote System Status Indicator Lights
- Carbon Tank for Chlorine Removal
- Water Softener
- UV Light
SHOW MORE DETAILS >>
Dimensions
HEIGHT | DEPTH | WIDTH |
72 inches | 18 inches | 48 inches |
Specifications
MEMBRANES | PRODUCTION* | RECOVERY | MOTOR** | WEIGHT (APPROX.) | INLET*** | OUTLETS |
Qty. 3 | 4,500 GPD | 50% | 2 HP | 350 Lbs | 1” FNPT | 3/4” FNPT |
Qty. 4 | 6,000 GPD | 50% | 2 HP | 380 Lbs | 1” FNPT | 3/4” FNPT |
Qty. 5 | 7,200 GPD | 50% | 2 HP | 410 Lbs | 1” FNPT | 3/4” FNPT |
Qty. 6 | 9,000 GPD | 50% | 2 HP | 440 Lbs | 1” FNPT | 3/4” FNPT |
Qty. 8 | 12,000 GPD | 50% | 2 HP | 500 Lbs | 1” FNPT | 3/4” FNPT |
Qty. 10 | 14,400 GPD | 50% | 2 HP | 560 Lbs | 1” FNPT | 3/4” FNPT |
- *Approximate product flow based on properly pretreated feed water of 1000 ppm TDS (as NACL), 15°C (59°F) and silt density index less than 3. Production capacity may vary due to feed water temperature, pressure, quality and product back pressure.
- * *Electrical: Standard: 230 VAC 60 HZ single phase (20 AMP L6-20 plug), Or 220/230 VAC 50 HZ Single Phase Pump: 125 PSI Maximum. Important: do not operate at low or reduced voltage, (ie 208 VAC). Overheating and reduced pump life will occur.
- * * *Inlet pressure 20 PSI Minimum (when running), 80 PSI Maximum.
- * * * *Qty. 10 available on 60 HZ units only (50 HZ not available).
Literature
Operator’s And Parts Manual
CWM Model
Features
- RO Element: 4″ x 40″ Extra Low Energy Thin Film
- Pressure Vessels: 304 Stainless Steel (SS)
- Pump: Centrifugal 304 SS Shell 316 SS Shaft
- Frame: 409 SS
- Flow Meters: Product And Waste
- Low Pressure Cutoff Switch
- Pre Filter: 1 Micron Sediment
- Pump Inlet Pressure Gauges
- Inlet Feed Electric Solenoid Valve
- Inlet Manual Shutoff Valve
- Product Reverse Flow Check Valve
- Waste Recycle Valve
- Electronic Controller
Options
- Carbon Tank for Chlorine Removal
- Water Softener
- UV Light
- Product Dump Valves
- Remote Light Kit
- Product Total Dissolved Solids (TDS) Meter
SHOW MORE DETAILS >>>
Dimensions
HEIGHT | DEPTH | WIDTH |
72 inches | 20 inches | 30 inches |
Specifications
Model | Elements | Production* | Recovery | Motor** | Shipping Weight (APPROX.) | Inlet*** | Outlet Products | Outlets Concentrate |
CWM-1 | Qty. 1 | 1,500 GPD | 50% | 3/4 HP | 200 Lbs. | 3/4″ FNPT | 1/2″ FNPT | 1/2″ FNPT |
CWM-2 | Qty. 2 | 3,000 GPD | 50% | 3/4 HP | 200 Lbs. | 3/4″ FNPT | 1/2″ FNPT | 1/2″ FNPT |
- *Approximate product flow based on properly pretreated feed water of 1000 ppm TDS (as NACL), 15°C (59°F) and silt density index less than 3. Production capacity may vary due to feed water temperature, pressure, quality and product back pressure.
- * *Electrical: Standard: 240 VAC 60 HZ Single Phase Pump: (15 Amp Type 6-15P Plug), 125 PSI Maximum (4″ Element). Optional: 240 VAC 50 Hz (Plug varies depending on location).
- * * *Inlet Pressure: 20 PSI Minimum (when running), 80 PSI Maximum.
Literature
Operator’s And Parts Manual
EWM Model
Features
- RO Elements: Extra Low Energy Thin Film
- Pressure Vessels: 304 Stainless Steel (SS)
- Frame: 409 SS
- Pump: Vane type
- Pump Pressure Gauge (liquid filled)
- Low Pressure Cutoff Switch
- Pre Filter: 1 Micron Sediment
- Inlet Filter Gauge
- Inlet Feed Electric Solenoid Valve
- Inlet Manual Shutoff Valve
- Product Reverse Flow Check Valve
- Waste Recycle Valve
Options
- Product Total Dissolved Solids (TDS) Meter
- Float Shutoff Kit
SHOW MORE DETAILS >>>
Dimensions
Height | Depth | Width |
50 inches | 7 inches | 24 inches |
Specifications
Elements | Production* | Recovery | Motor** | Weight (approx.) | Inlet*** | Outlets |
Qty. 1 (4″) | 1,500 GPD | 50% | 1/2 HP | 120 Lbs. | 1/2″ FNPT | 3/8″ JG |
Qty. 1 (2 1/2″) | 750 GPD | 50% | 1/2 HP | 110 Lbs. | 1/2″ FNPT | 3/8″ JG |
- *Approximate product flow based on properly pretreated feed water of 1000 ppm TDS (as NACL), 15° C (59° F) and silt density index less than 3. Production capacity may vary due to feed water temperature, pressure, quality and product back pressure.
- * *Electrical: Standard 120 VAC 60 HZ Single Phase
- * * *Inlet Pressure: 20 PSI Minimum (when running), 80 PSI Maximum.
