Economy Series
FEATURES
- RO Elements: 4" x 40" Extra Low Energy Thin Film
- Pressure Vessels: 304 Stainless Steel (SS)
- Pump: Centrifugal Pump - Stainless
- Frame: 409 SS
- Flow Meters: Product and Waste
- Pump Pressure Gauge (liquid fi lled)
- Low Pressure Cutoff Switch
- Pre Filter: 1 Micron Sediment
- Inlet Filter Gauge
- Inlet Feed Electric Solenoid Valve
- Inlet Manual Shutoff Valve
- Product Reverse Flow Check Valve
- Waste Recycle Valve
SPECIFICATIONS
| Height: | 72 inches |
| Depth: | 18 inches |
| Width: | 24 inches |
| Elements | Production* | Recovery | Motor** | Weight (Approx.) | Inlet*** | Outlets |
|---|---|---|---|---|---|---|
| Qty. 1 | 1,500 GPD | 50% | 3/4 HP | 145 Lbs. | 3/4 FNPT | 1/2 FNPT |
| Qty. 2 | 3,000 GPD | 50% | 3/4 HP | 175 Lbs. | 3/4 FNPT | 1/2 FNPT |
* Approximate product fl ow based on properly pretreated feed water of 1000 ppm TDS (as NACL), 15° C (59° F) and silt density index less than 3. Production capacity may vary due to feed water temperature, pressure, quality and product back pressure.
** Electrical: Standard 240 VAC 60 HZ Single Phase
*** Inlet Pressure: 20 PSI Minimum (when running), 80 PSI Maximum.
MANUALS
Click here to go to the Manuals page.Wall Mount
FEATURES
- RO Elements: Extra Low Energy Thin Film
- Pressure Vessels: 304 Stainless Steel (SS)
- Frame: 409 SS
- Pump: Vane type
- Pump Pressure Gauge (liquid filled)
- Low Pressure Cutoff Switch
- Pre Filter: 1 Micron Sediment
- Inlet Filter Gauge
- Inlet Feed Electric Solenoid Valve
- Inlet Manual Shutoff Valve
- Product Reverse Flow
SPECIFICATIONS
| Height: | 50 inches |
| Depth: | 7 inches |
| Width: | 24 inches |
| Elements | Production* | Recovery | Motor** | Weight (Approx.) | Inlet*** | Outlets |
|---|---|---|---|---|---|---|
| Qty. 1 (4") | 1,500 GPD | 50% | 1/2 HP | 120 Lbs. | 1/2" FNPT | 3/8" JG |
| Qty. 1 (2 1/2") | 750 GPD | 50% | 1/2 HP | 110 Lbs. | 1/2" FNPT | 3/8" JG |
* Approximate product fl ow based on properly pretreated feed water of 1000 ppm TDS (as NACL), 15° C (59° F) and silt density index less than 3. Production capacity may vary due to feed water temperature, pressure, quality and product back pressure.
** Electrical: Standard 120 VAC 60 HZ Single Phase
*** Inlet Pressure: 20 PSI Minimum (when running), 80 PSI Maximum.
