Commercial Series
Models produce from 4,400 to 12,000 gallons of water per day. Reduce heavy metals, nitrates, radionuclides, herbicides, pesticides, THM's, VOC's and other contaminants.
FEATURES
- RO Elements: 4" x 40" Extra Low Energy Thin Film
- Pressure Vessels: 304 Stainless Steel (SS)
- Pump: Centrifugal 304 SS shell, 316 SS shaft
- Frame: 409 SS
- Control: Programmable with LCD readout
- Flow Meters: Product and Waste
- Pump Pressure Gauges (liquid filled)
- Low pressure cutoff switch
- Pre filter: 5 Micron sediment
- Inlet filter Gauges (pre and post filter)
- Inlet feed electric solenoid valve
- Inlet manual shutoff valve
- Product reverse flow check valve
- Waste recycle valve
OPTIONS
- Total Dissolved Solids (TDS) Meter
- Product Dump valves (Option requires TDS meter)
- Remote system status indicator lights.
- Carbon Tank for Chlorine removal
- Water Softener
- UV light
SPECIFICATIONS
| Height: | 72 inches |
| Depth: | 18 inches |
| Width: | 40 inches |
| Membranes | Production* | Recovery | Motor** | Weight (Approx.) | Inlet*** | Outlets |
|---|---|---|---|---|---|---|
| Qty. 3 | 4400 GPD | 50% | 2 HP | 275 Lbs. | 1" FNPT | 3/4" FNPT |
| Qty. 5 | 7200 GPD | 50% | 2 HP | 330 Lbs. | 1" FNPT | 3/4" FNPT |
| Qty. 6 | 9000 GPD | 50% | 2 HP | 360 Lbs. | 1" FNPT | 3/4" FNPT |
| | ||||||
| Qty. 8 | 12000 GPD | 50% | 2 HP | 420 Lbs. | 1" FNPT | 3/4" FNPT |
* Approximate product flow based on properly pretreated feed water of 1000 ppm TDS (as NACL), 15°C (59°F) and silt density index less than 3. Production capacity may vary due to feed water temperature, pressure, quality and product back pressure.
** Electrical: 240 VAC 60 HZ single phase (20 amp plug). Pump: 125 PSI Maximum.
*** Inlet pressure 20 PSI Minimum (when running), 80 PSI Maximum.
